Crosman SASP32 Manuel d'utilisateur télécharger pdf

MODEL STINGER P32

Soft Air Pistol

6mm Plastic BB

OWNER'S MANUAL

READ ALL INSTRUCTIONS AND WARNINGS IN THIS

MANUAL BEFORE USING THIS SOFT AIR RIFLE

Distributed by

Crosman Corporation

7629 Routes 5 & 20,

East Bloomfield, NY 14443

www.crosman.com

1-800-7AIRGUN (724-7486) SASP32A515

SPECIFICATIONS

PERFORMANCE

Many factors affect velocity, including brand of projectile, type of projectile and barrel condition.

Mechanism/Action Spring air repeater

Caliber/Ammunition 6mm plastic BBs

Magazine Capacity up to 10 plastic BBs

Resevoir up to 50 plastic BBs

Weight 8.6 oz (.23 kg)

Sights Front: White dot on Blade

Rear: White dots on fixed notch

Overall Length 7" (18cm)

Safety Lever

Velocity Up to 230 fps

REPAIR SERVICE

If your soft air pistol needs repair, we recommend that you call Crosman Corporation Customer Service

at 1-800-724-7486 or 585-657-6161 or visit our web site at www.crosman.com. (International customers

should contact their distributor.) DO NOT ATTEMPT TO DISASSEMBLE IT! Your airgun requires special

tools and fixtures to repair it. Any disassembly or modification not performed by an Authorized Service

Station will void the warranty and could be dangerous.

LIMITED 30 DAY WARRANTY

This product is warranted to the retail consumer for 30 days from date of retail purchase against defects in material and

workmanship and is transferable. You should retain the original sales receipt as record of date of purchase.

WHAT IS COVERED

Replacement parts and labor. Transportation charges to consumer for repaired product.

WHAT IS NOT COVERED

Transportation charges to Crosman for product. Damages caused by abuse or failure to perform normal

maintenance. (See Step 5) Any other expense. CONSEQUENTIAL DAMAGES, INCIDENTAL DAM-

AGES, OR INCIDENTAL EXPENSES, INCLUDING DAMAGE TO PROPERTY. SOME STATES DO NOT

ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE

ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.

WARRANTY CLAIMS

USA

Customers: Attach your name, address, description of problem, phone number and copy of sales receipt

to product. Package and return to Crosman Corporation, Rts. 5&20, E. Bloomfield, NY 14443.

Canadian Customers:

Follow packaging procedures above and send to Crosman Parts & Service Depot, 611

Neal Drive, Peterborough, Ontario K9J 6X7 Canada.

International Customers:

Please return product to your nearest distributor. If you do not know your distributor,

please call 585-657-6161 and ask for our International Department for assistance.

IMPLIED WARRANTIES

ANY IMPLIED WARRANTIES, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND

FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO ONE YEAR FROM DATE

OF RETAIL PURCHASE. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED

WARRANTY LASTS, SO THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU.

To the extent any provision of this warranty is prohibited by federal, state, or municipal law which cannot

be preempted, it shall not be applicable. This warranty gives you specific legal rights, and you may also

have other rights which vary from state to state and country to country.

• Locate the BB guide on the front of the clip. Pull the BB guide down and to the right until it

locks into place.

• Holding the clip horizontally, slide open the reservoir door on the top of the clip.

• Empty the BBs from the clip in to your hand or a container.

• Rock the clip to release the BBs from the magazine into the reservoir.

• Repeat the steps above until all the BBs are out of the reservior.

4. Aiming and Firing Safely

4.1 Loading, cocking and Firing

• Make sure the muzzle is pointed in a SAFE DIRECTION.

• Take the soft air pistol "OFF SAFE" (See Step 2.2) while keeping it pointed in a

SAFE DIRECTION.

• While holding the air pistol in a horizontal position, cock the soft air pistol by

firmly holding the slide with your entire hand, pulling the slide rearward and

releasing it in a smooth motion to cock (Fig. 8).

• Be sure to keep your fingers out of the trigger guard and away from the trigger.

• Point the soft air pistol in a safe direction and pull the trigger to fire.

• Repeat these steps until you are no longer firing plastic BBs.

• Remove the clip (See Step 3.1).

4.2 Aiming and Firing Safely

• You and others with you should always wear shooting glasses to protect your eyes.

• Always aim your soft air pistol in a SAFE DIRECTION. When you are sure of your target

and backstop, and the area around the target is clear, cock the soft air pistol (See Step 4.1),

take "OFF SAFE" (See Step 2.2) and squeeze the trigger to fire.

• Do not shoot at hard surfaces or at the surface of water. The plastic BBs may bounce off or

ricochet and hit someone or something you had not intended to hit. If the plastic BBs should

happen to hit a hard surface, DO NOT reuse those plastic BBs because they could cause

possible damage to your soft air pistol.

• Always choose your target carefully. It is best to shoot at targets, which are attached to a

safe backstop. Your backstop should be checked for wear before and after each use.

Replace your backstop if the surface is worn or damaged, or if a ricochet occurs.

• Your soft air pistol is designed for target shooting and is suited for both indoor and outdoor

use. Always remember to place your target carefully.

THINK about what you will hit if you miss the target.

• The soft air pistol is correctly aimed when the front sight

blade is positioned exactly in the notch of the rear sight. The

top of the front sight blade should be even with the top of the

notch in the rear sight. The bullseye should appear to rest

on the top of the front sight (Fig. 9).

5. Maintaining Your Soft Air Pistol

• Tampering with the soft air pistol or attempts to change the soft air pistol in any way may

make it unsafe to use, cause injury particularly to the eye, and will void the warranty.

• If you drop your soft air pistol, check to see that it works properly before you use it

again. If anything seems changed, like a shorter or weaker trigger pull, this may mean

worn out or broken parts. Call Customer Service at Crosman for assistance before

using your soft air pistol again.

6. Reviewing Safety

• Do not ever point the soft air pistol at any person. Do not ever point the soft air pistol at

anything you do not intend to shoot.

• Always treat the soft air pistol as though it is loaded and with the same respect you would a

firearm.

• Always aim in a SAFE DIRECTION. Always keep the muzzle of the soft air pistol pointed in

a SAFE DIRECTION.

• Always keep the soft air pistol "ON SAFE" until you are ready to shoot in a SAFE DIRECTION.

• Always check to see if the soft air pistol is "ON SAFE" and unloaded when getting it from

another person or from storage.

• Always keep your finger off the trigger and out of the trigger guard until ready to shoot.

• If your reading or prescription glasses are not safety glasses make sure you wear shooting

glasses over your regular glasses.

• Use 6 mm plastic BBs only.

• Do not shoot at hard surfaces or at the surface of water. The plastic BBs may bounce off or

ricochet and hit someone or something you had not intended to hit. If the plastic BBs should

happen to hit a hard surface, DO NOT reuse those plastic BBs because they could cause

possible damage to your soft air pistol.

• Replace the backstop if it becomes worn. Place the backstop in a location that will be safe

should the backstop fail.

• Do not attempt to disassemble or tamper with your soft air pistol. Call Customer Service at

Crosman Corporation for repair.

• Do not put the soft air pistol away loaded. Make sure ALL of the plastic BBs are unloaded

from the soft air pistol (See Step 3.2).

• Always store this soft air pistol in a secure location.

YOU AND OTHERS WITH YOU SHOULD ALWAYS WEAR SHOOTING GLASSES TO PROTECT YOUR EYES.

READ ALL INSTRUCTIONS BEFORE USING.

BUYER AND USER HAVE THE DUTY TO OBEY ALL LAWS ABOUT THE USE AND OWNERSHIP OF THIS

SOFT AIR PISTOL.

Please read this owner's manual completely. Remember, to treat this soft air pistol with the same

respect you would a firearm. Always carefully follow the safety instructions found in this owner's

manual and keep this manual in a safe place for future use.

If you have any questions, regarding your new soft air pistol, please contact Crosman Customer

1. Learning the Parts of Your New Soft Air Rifle - Learning the names of the parts of your new

soft air rifle will help you to understand your owner's manual. Use this manual to increase your

enjoyment of this soft air pistol.

2. Operating the Safety

2.1 To Put the soft air pistol "ON SAFE"

• Locate the safety on the left hand side of the receiver.

• Push the safety upward, covering the red dot (Fig. 2A).

The safety is not "ON SAFE" unless it is pushed up all the way

and covering the red dot.

Like all mechanical devices, a soft air gun safety can fail. Even

when the safety is "ON SAFE", you should continue to handle the

soft air gun safely. NEVER point the soft air gun at any person.

NEVER point the soft air gun at anything you do not intend to

shoot.

2.2 To Take The Soft Air Pistol "OFF SAFE":

• Push the safety downward all the way (Fig. 2B). When the red

dot is exposed on the receiver, the soft air pistol is "OFF SAFE"

and can be fired.

3. Loading and Unloading Plastic BBs

3.1 Loading Plastic BBs

• Make sure the soft air pistol is "ON SAFE" (See Step 2.1).

• Point the soft air pistol in a SAFE DIRECTION.

• While supporting the bottom of the grip with your hand to catch the clip, press the clip release

lever and remove the clip from the bottom of the grip frame (Fig. 3).

• Holding the clip vertically, open the reservoir door on the top by sliding the door (Fig. 4)

• Fill the reservoir with up to 50 BBs and slide the door closed.

• Locate the BB guide (Fig. 5) on the front of the clip. Pull the BB guide down and to the right

until it locks into place.

• Holding the clip as shown shake the clip until 10 BBs feed into the magazine (Fig. 6).

• Release the BB guide by pushing the spring to the left and slowly releasing.

• Insert the loaded clip back into the bottom of the grip frame until you hear a click, indicating the

clip is securely locked into place (Fig. 7).

Note: The magazine will not automatically fill from the reservoir. You will have to remove the clip

and shake BBs from the reservoir into the magazine after each 10 shots.

3.2 Unloading Plastic BBs

• Make sure the soft air pistol is "ON SAFE" (See Step 2.1) and the muzzle pointed in a SAFE

DIRECTION.

• While supporting the bottom of the grip with your hand to catch the clip, press the clip release

lever and remove the clip from the bottom of the grip frame (Fig. 3).

Fig. 1

STEPS FOR SAFE SHOOTING

1. Learning The Parts Of Your New Soft Air Pistol 4. Aiming and Firing Safely

2. Operating the Safety 5. Maintaining Your Soft Air Pistol

3. Loading And Unloading Plastic BBs 6. Reviewing Safety

THIS SOFT AIR PISTOL IS INTENDED FOR USE BY THOSE 16 YEARS OF AGE OR OLDER.

Safety

Front Sight

Muzzle

Trigger

Safety - See Fig. 2A

Clip

Trigger

Guard

Rear Sight

Clip

Release

Lever

Slide

Fig. 2A - Push up for “ON SAFE”

Fig. 2B - Push down for “OFF SAFE”

Clip

Release

Lever

Resevoir

Guide

Fig. 3

Fig. 4

Fig. 5

Fig. 6

Fig. 7

Fig. 9

Fig. 8

Target

Front Sight Blade

Rear Sight

Not a toy. Adult supervision required. Misuse or careless use may

cause serious injury, particularly to the eye. May be dangerous up

100 yards (91.44 meters).

WARNING:

Do not brandish or display this airgun in public – it may confuse

people and may be a crime. Police and others may think it is a

firearm. Do not change the coloration and markings to make it look more like a firearm.

That is dangerous and may be a crime.

WARNING:

Keep the soft air pistol in the "ON SAFE" position until you are

actually ready to shoot.

WARNING:

Use 6 mm plastic BBs only in this soft air pistol. Use of any other

ammunition can cause injury to you or damage to the soft air pistol.

WARNING:

Never assume that because the soft air pistol no longer fires a plastic

BB and or the clip is removed from the grip frame, that a plastic BB is

not lodged in the barrel. Always treat the soft air pistol as though it is loaded and with the

same respect you would a firearm.

WARNING:

Make sure you firmly grasp the slide with your entire hand as you

cock it to prevent it from slipping and snapping shut, causing

possible injury.

WARNING:

1 2 3

Résumé du contenu

Page 1 - OWNER'S MANUAL

MODEL STINGER P32Soft Air Pistol6mm Plastic BBOWNER'S MANUALREAD ALL INSTRUCTIONS AND WARNINGS IN THIS MANUAL BEFORE USING THIS SOFT AIR RIFLE Di

Page 2 - MANUAL DEL PROPIETARIO

MODELO STINGER P32Pistola de aire suaveMuniciones de plástico (6 mm)MANUAL DEL PROPIETARIOLEA TODAS LAS INSTRUCCIONES Y ADVERTENCIAS DE ESTE MANUAL AN

Page 3 - GUIDE D'UTILISATION

MODÈLE STINGER P32Pistolet Soft Air BB plastique 6 mmGUIDE D'UTILISATIONLISEZ TOUTES LES DIRECTIVES ET LES AVERTISSEMENTS CONTENUS DANS CE GUIDE

Commentaires sur ces manuels

Pas de commentaire

Crosman SASP32 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Sports et loisirs Crosman SASP32. Crosman SASP32 User Manual [en] [pl] [de] Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Sports et loisirs Crosman SASP32